How to Enter Backflow Tests in XC2LIVE!
Once you are logged in to xc2live.net, click the "Enter Backflow Test Results" button.
Search for the Assembly
First you need to search for the backflow assembly
You are REQUIRED to use 2 DIFFERENT SETS OF CRITERIA
For example, below is showing a search using Serial Number and Address Number as the criteria
There are pull-down menus to select different criteria (street name, assembly id, meter #, etc)
Enter the required two sets of information to search for the record
Click "Find It" to start the search
To Access Drop-Down Menu For Alternate Search Criteria
To access alternate criteria for your search, click on the arrows next to the two search boxes.
A pull-down menu will appear.
Highlight and click to select different search criteria.
City of Houston Testers ONLY - Search Criteria #1 must be by Serial Number, per the City of Houston
Click the Select button to Open Backflow Record
Once you have found the assembly you have tested and wish to enter a test for, click the select button to open the record.
How To Enter a Passing Test
This is for a Passing Test Only!
1. Enter the test results
2. Select and Click all necessary Required checkboxes
• Select Tester Certificate & Name
• Enter Test Date - Click the Calendar Icon to select the correct Test Date
• Enter Test Kit S/N
You may enter additional contacts for test confirmation emails, such as your company or water customer.
4. When you are finished entering the test, click the "Submit Test Results" button
Some organizations require payment to submit a test - the amount may vary based on the organization.
Note: Different organizations may have additional requirements; be sure to check all requirements before submitting the test.